公告

LinkIt SDK v4.5.0 現已推出

Monday 10th July 2017

LinkIt SDK v4.3.0 已經上線,可在 Labs 與 MOL 下載。

新功能

  • [MT7686] Added support for MT7686 chipset with the same feature set of MT7682S.
  • [MT2523 + MT5932] Added a reference design to provide Wi-Fi connectivity on LinkIt 2523 HDK with MT5932 HDK. (/project/mt2523_hdk/apps/wifi5932_ref_design)
  • [MT7682] Added a reference design to support MP3 decoding, AMR decoding and AMR encoding. (/project/mt7682_hdk/apps/audio_ref_design)
  • [MT7682] Added support for W-Fi AP and STA concurrent mode (Repeater mode).
  • [ MT25x3] Added support for Audio/Video Remote Control Profile (AVRCP) 1.6 of Bluetooth EDR.
  • [ MT25x3] Added support for stereo with two headsets through A2DP and playing from local MP3 file (Advanced Wireless Stereo, AWS).

修正錯誤

  • [ MT25x3] Changing the configuration of connection link in BLE or EDR Piconet might cause receiving data errors.
  • [ MT25x3] While inquiry scan and page scan are enabled and EDR link is established, the EDR link might disconnect.
  • [ MT25x3] When a headset pauses the local music with AWS and a link is connected between the headset and the host, an incoming mobile terminated (MT) call of the host will result in headset crash.
  • [ MT25x3] While debugging with μVision Tools (IAR), suspending the MT25x3 device for over 30 seconds will result in reset by watchdog timer.
  • [MT25x3] If MT call is received from host to the speaker through hands-free profile, the audio source in speaker will not switch to the call, if a Bluetooth speaker is playing MP3 with AWS.
  • [MT7682] Setting Wi-Fi profile with SSID and then setting PSK will result in Wi-Fi connection (in STA mode) failure.
  • [MT7682] In Open-WEP connection, if the connection between MT768x STA and an AP fails, the STA device will not inform the application about the connection failure.
  • [MT7682] If a connection is maintained for over 8 hours between MT768x host in STA mode and an AP with password configuration, the data decryption might be incorrect.
  • [MT7682] In Wi-Fi station mode with special low power state (PS mode is equal to 2), after the connection to an AP is established and DHCP process is complete (AP granted the IP), switching to AP mode will result in system failure.

觀看完整 release note

下載方式 - 簽約客戶

對於已經擁有 MediaTek Online(MOL) 帳戶的簽約客戶,請在登入 MOL 之後, 點選主頁面的 "Tool & SDK",可以看到SDK包,可以在這裡下載您需要的SDK包。SDK是打包成一整包,包含所有的程式碼,lib以及tools。

請注意:
本次 SDK 釋出是透過原本的 Tool release 系統,配置 SDK 包類型的時候配置為 "Binaries" 類型。因此,在下載的時候請記得是選擇 "Download All Binaries" 或者 "Download Selected Binaries" 來做多個SDK的下載,或者 是直接選擇"Binaries"做單個SDK的下載。

請不要選擇 "Download All Sources" 或者 "Download Selected Sources",否則會提示 "No Source File"。

下載方式 - 一般用戶

對於沒有 MOL 帳號的一般用戶,請前往 MT2523 下載頁面或者 MT7687 下載頁面以下載公開版本的 LinkIt SDK。

分享這篇文章