MT2523 API Reference  LinkIt SDK v4
hal_display_lcd_interface_mode_t Struct Reference

This event structure presents the parameters of the serial interface. More...

#include <hal_display_lcd.h>

Data Fields

hal_display_lcd_interface_port_t port_number
 The port number of the serial interface. More...
 
bool three_wire_mode
 Enable or disable 3 wire mode. More...
 
bool single_a0_mode
 Enable or disable single A0 mode. More...
 
bool cs_stay_low_mode
 Enable or disable chip select stay low mode. More...
 
bool read_from_SDI
 Read from the SDI or not. More...
 
hal_display_lcd_interface_width_t width
 Serial interface width. More...
 
hal_display_lcd_driving_current_t driving_current
 The driving current. More...
 
bool hw_cs
 Enable or disable hardware(auto) chip select. More...
 
hal_display_lcd_power_domain_t power_domain
 The output pin's power domain. More...
 
bool start_byte_mode
 Enable or disable start byte mode. More...
 

Detailed Description

This event structure presents the parameters of the serial interface.

Field Documentation

bool cs_stay_low_mode

Enable or disable chip select stay low mode.

The driving current.

bool hw_cs

Enable or disable hardware(auto) chip select.

The port number of the serial interface.

The output pin's power domain.

bool read_from_SDI

Read from the SDI or not.

bool single_a0_mode

Enable or disable single A0 mode.

bool start_byte_mode

Enable or disable start byte mode.

bool three_wire_mode

Enable or disable 3 wire mode.

Serial interface width.


The documentation for this struct was generated from the following file: