MT2523 API Reference  LinkIt SDK v4

Overview

Enumerations

enum  hal_display_dsi_status_t {
  HAL_DISPLAY_DSI_STATUS_INITIALIZATION_FAILED = -6,
  HAL_DISPLAY_DSI_STATUS_POWER_FAILED = -5,
  HAL_DISPLAY_DSI_STATUS_COMMAND_QUEUE_FAILED = -4,
  HAL_DISPLAY_DSI_STATUS_INVALID_PARAMETER = -3,
  HAL_DISPLAY_DSI_STATUS_READ_FAILED = -2,
  HAL_DISPLAY_DSI_STATUS_ERROR = -1,
  HAL_DISPLAY_DSI_STATUS_OK = 0
}
 The return status of DSI API. More...
 
enum  hal_display_dsi_transfer_mode_t {
  HAL_DISPLAY_DSI_TRANSFER_MODE_LP = 0,
  HAL_DISPLAY_DSI_TRANSFER_MODE_HS,
  HAL_DISPLAY_DSI_TRANSFER_MODE_AUTO,
  HAL_DISPLAY_DSI_TRANSFER_MODE_NUM
}
 The DSI transfer mode selections. More...
 

Enumeration Type Documentation

The return status of DSI API.

Enumerator
HAL_DISPLAY_DSI_STATUS_INITIALIZATION_FAILED 

The DSI initialization has failed.

HAL_DISPLAY_DSI_STATUS_POWER_FAILED 

The DSI power configuration has failed.

HAL_DISPLAY_DSI_STATUS_COMMAND_QUEUE_FAILED 

Unable to complete sending data using a command queue.

HAL_DISPLAY_DSI_STATUS_INVALID_PARAMETER 

Invalid parameter.

HAL_DISPLAY_DSI_STATUS_READ_FAILED 

Unable to receive data transfer from the LCM driver IC.

HAL_DISPLAY_DSI_STATUS_ERROR 

An error occurred; please check the DSI engine status.

HAL_DISPLAY_DSI_STATUS_OK 

The DSI operation completed successfully.

The DSI transfer mode selections.

Enumerator
HAL_DISPLAY_DSI_TRANSFER_MODE_LP 

The DSI always transfers in low power mode.

HAL_DISPLAY_DSI_TRANSFER_MODE_HS 

The DSI always transfers in HS mode.

HAL_DISPLAY_DSI_TRANSFER_MODE_AUTO 

The DSI will switch to low power / HS mode automatically according to the command type.

HAL_DISPLAY_DSI_TRANSFER_MODE_NUM 

The number of DSI transfer modes (invalid mode).